Car Cover Shop
Car Covers
 
Reveal Car Covers
 
AccuMate
 
Air Chambers
 
 
Car Half Covers
 
 
AccuMate
 
Garage Floor Tiles
 

CTEK and AccuMate 6V & 12V

Accumate

We now stock both of the market leading battery conditioners on the UK market. In a nutshell, if your vehicle is used irregularly, classic or modern, batteries can drain surprisingly quickly, yet fitting a conditioner can take seconds, especially with the optional cigar lighter input, and ensure your car starts first time when you need it to.

AccuMate - 6V & 12V selectable smart battery optimiser - ideal for classic cars, motorcycles and many other uses.

 



CTEK
CTEK
- the manufacturer of choice for major car manufacturers like Mercedes, Porsche, Aston Martin, Bentley and Ferrari. Why pay a huge premium for their logo when you can buy the same unit from us?

Uses include classic cars, especially MGB, VW & American Cars with 6V batteries, modern sports cars, off-road cars, race cars & bikes, tractors, lawn & garden equipment, emergency service vehicles – basically anything which requires a fully charged lead-acid battery needs a conditioner!

CTEK battery conditioners are delivered with two different battery leads, one with clamps and one with eyelet terminals, all colour coded for easy +/- identification. If the battery is difficult to access, the lead with eyelet terminals can be mounted to the battery, and the quick connectors are located so that it is easily reached for charging.

You can also purchase additional leads allowing you to have one lead with eyelet terminals fixed to all your vehicles with batteries that are difficult to get at, and charge them simply from the same charger. There is also an extension lead and Bumper - protective rubber case for your charger.

CTEK chargers are designed to be left permanently on your vehicle. CTEK are OEM suppliers to 5 major prestige car manufacturers including Aston Martin, Porsche, Bentley and Ferrari. You may buy the identical conditioner from their dealers at inflated prices - but you do get their badge on it....

 

CTEK Units:

[Click Image to zoom]

MXT 14 £219.99 Add to basket

The MXT 14 is a professional 24V battery charger. It is developed for commercial vehicles where vehicle batteries are put under considerable strain and is therefore ideal for bus, truck and commercial vehicle workshops.
The CTEK MXS 14 is equipped with all necessary features and functions to solve a broad range of battery related problems. It offers features such as battery diagnosis that shows if a battery can receive and retain a charge, a special reconditioning function that restores stratified and deeply discharged batteries, unique maintenance charging and a temperature sensor for optimised charging regardless of the weather conditions in unheated workshops. It also has a power supply mode which allows the battery to be disconnected from the vehicle without losing important configurations on on-board computer systems.

The MXT 14 is a fully automatic 8-step charger that delivers 14A to 24V batteries from 28-300Ah and is suitable for maintenance charging up to 500Ah. The charger is IP 44 classified (outdoor use), designed to protect vehicle electronics and non-sparking, reverse polarity protected and short-circuit proof. It is delivered with a 2-year warranty.

It also has a supply capability so is ideal for temporary maintenance of vehicle settings when the battery is disconnected e.g. for remapping. It is supplied with clamps and a temperature sensor on the cable.
Details:

  • Volts: 24V
  • Rated Voltage: AC 220-240VAC, 50-60Hz
  • Charging voltage: NORMAL: 28.8V, RECOND: 31.6V, SUPPLY: 27.2V
  • Minimum battery voltage: 2.0V
  • Charging current: 14A max
  • Current, mains 2.9A rms (at full charging current)
  • Back current drain: <1Ah/month
  • Ripple: <4%
  • Ambient temperature usage: -20°C to +50°C, output power is reduced automatically at high temperatures
  • Charger type: 8 step, fully automatic charging cycle
  • Battery types: All types of 24V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL)
  • Battery capacity: 28-300Ah up to 500Ah for maintenance
  • Dimensions: 235 x 130 x 65mm (L x W x H), weight 1.9kg
  • Insulation class: IP44
MULTI XS 25000 £199.49 Add to basket
The CTEK MULTI XS 25000 is powerful for batteries that require rapid charging: in your RV, boat, or workshop. The charger automatically adjusts the charge to the battery's temperature. More product details below.
MXS 5.0 £79.95 Add to basket

The MXS 5.0 is a charger that offers state of the art technology that was previously only found in CTEKs professional product range. The charger can solve a broad range of battery-related problems and is the perfect charger for those with high demands. The MXS 5.0 offers features such as battery diagnosis that shows if a battery can receive and retain a charge, a special reconditioning function that restores stratified and deeply discharged batteries, unique maintenance charging, a mode for optimised charging during cold winter days and the charging of demanding AGM batteries (i.e. Optima). The unique display allows the user to follow the entire charging process.

The MXS 5.0 is a fully automatic 8-step charger that delivers selectable 0.8A or 5A to 12V batteries from 1,2-110Ah and is suitable for maintenance charging up to 160Ah. The charger is IP 65 classified (splash and dust proof), designed to protect vehicle electronics and non-sparking, reverse polarity protected and short-circuit proof. It is delivered with a 5-year warranty.

This our recommended unit for larger (V8/V12) sportscar batteries or big diesel 4x4s with batteries over 75aH, and where faster charging may be required.

  • Auto: Fully automatic for optimal charging CTEK Battery Conditioner
    12V: For all lead-acid batteries
    Step 7 indicates fully charged battery, moving to step 8 for maintenance charging
    COLD/AGM: Charging in cold conditions and AGM batteries
    RECOND: Recondition of deeply discharged batteries

Technical Specification:

  • Model number: 1049
  • Volt: 12V
  • Rated Voltage: AC 220-240VAC, 50-60Hz
  • Charging voltage: SMALL, NORMAL: 14.4V, COLD/AGM: 14.7V, RECOND: 15.8V
  • Min battery voltage: 2.0V
  • Charging current: 5A max, current, mains: 0.65A rms (at full charging current)
  • Back current drain: <1Ah/month, ripple: <4%
  • Ambient temperature: -20°C to +50°C, output power is reduced automatically at high temperatures
  • Charger type: 8 step, fully automatic charging cycle
  • Battery types: All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL)
  • Battery capacity: 1.2-110Ah up to 160Ah for maintenance
  • Dimensions: 168 x 65 x 38mm (L x W x H),weight: 0.6kg
  • Insulation class: IP65
XC800 £44.95 Add to basket

The CTEK XC 800 is a full-featured 6V charger in mini format. It gives the batteries of your vintage vehicle a new life. CTEK XC 800 charges small batteries that hold as little as 1 Ah, up to the biggest tractor batteries.
The CTEK XC 800 is delivered with two different battery leads, one with clamps and one with eyelet terminals, all colour coded for easy +/- identification.
If the battery is difficult to access, the lead with eyelet terminals can be mounted to the battery, and the quick connectors are located so that it is easily reached for charging.
You can also purchase additional leads allowing you to have one lead with eyelet terminals fixed to all your vehicles with batteries that are difficult to get at, and charge them simply from the same charger.

  • Three step, fully automatic switch mode model.
  • Charges lead-acid batteries (Wet, MF, GEL and AGM) from 1.2Ah to 32Ah, 1.2-100Ah maintenance charging.
  • Maintenance pulse charging increases battery life and gives superb performance.
  • Charges even drained batteries.
  • Pulse recover of slightly sulphated batteries.
  • Low back current drain, low ripple and input voltage independent (170-260V).
  • High efficiency: 85%.
  • Delivered with two interchangeable connection leads, one with clamps, and one with eyelet terminals.
  • The charger can be connected for months, ideal for seasonal vehicles.
  • Compact design with mounting holes for permanent assembly.
  • Easy Wall mounting, easily fitted in place using two screws. The diameter of the mounting holes is 4.2mm.
  • 2 year warranty.
MXS 3.8 £64.95 Add to basket

CTEK MXS 3.8 Battery ConditionerCTEK Battery Conditioner

The CTEK MXS 3.8 is a proven and reliable charger. It is the successor to the hugely successful XS3600, itself replaced by the MXS3.6, which consistently won awards and is our recommend charger/conditioner for batteries up to 120aH – for sports and executive cars with 3 litre plus engines which typically have batteries of 65aH+. It is the same unit that CTEK produce for Ferrari, Porsche, Aston Martin, Mercedes and Bentley – but without their sticker which typically doubles price !

It offers important features such as desulphation, maintenance charging and cold mode for optimised charging during cold winter days.
It is also suitable for charging demanding AGM batteries (i.e. Optima). It is the ideal charger for those looking for quality and simple ‘connect and forget’ charging.
The MXS 3.8 is a fully automatic 7-step charger that charges 12V batteries from 7-75 Ah and is suitable for maintenance charging up to 120Ah.
The MXS 3.8 is IP 65 classified (splash and dust proof) and delivers selectable 0.8A or 3.6A.
It is designed to protect vehicle electronics and is non-sparking-, reverse polarity protected and short-circuit proof.
The MXS 3.8 is delivered with a 5-year warranty.CTEK Battery Conditioner

  • Auto: Fully automatic for optimal charging
  • 12V: For all lead-acid batteries
  • Fully Charged Battery / Maintenance Charging
  • COLD/AGM: Charging in cold conditions and AGM batteries
  • Volts: 12V
  • Rated Voltage: AC 220-240VAC, 50-60Hz
  • Charging voltage: SMALL, NORMAL: 14.4V, COLD/AGM: 14.7V
  • Minimum battery voltage: 2.0V
  • Charging current: 3.6A max
  • Current: mains 0.65A rms (at full charging current)
  • Back current drain: <1Ah/month, ripple: <4%
  • Ambient temperature: -20°C to +50°C, output power is reduced automatically at high temperatures
  • Charger type: 4-step, fully automatic charging cycle
  • Battery types: All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL)
  • Battery capacity: 7-75Ah up to 120Ah for maintenance
  • Dimensions:165 x 61 x 38mm (L x W x H), weight: 0.5kg
  • Insulation class: IP65
MXS 7.0 £109.50 Add to basket

The MXS 7.0 is the perfect universal 12V charger. It is ideal for charging larger batteries such as caravan, RV, boat and car batteries. These types of vehicles often demand features that can solve a broad range of battery-related problems. The MXS 7.0 offers features such as battery diagnosis that shows if a battery can receive and retain a charge, a special reconditioning function that restores stratified and deeply discharged batteries, unique maintenance charging, a mode for optimised charging during cold winter days and the charging of demanding AGM batteries (i.e. Optima). It also has a power supply mode which allows the battery to be disconnected from the vehicle without losing important configurations.

The MXS 7.0 is a fully automatic 8-step charger that delivers 7A to 12V batteries from 14-150Ah and is suitable for maintenance charging up to 225Ah. The charger is IP 65 classified (splash and dust proof), designed to protect vehicle electronics and non-sparking, reverse polarity protected and short-circuit proof. It is delivered with a 5-year warranty.

Technical Summary:CTEK Battery Conditioner

  • Auto: Fully automatic for optimal charging
  • 12V: For all lead-acid batteries, for fully charged battery / maintenance charging
  • COLD/AGM: Charging in cold conditions and AGM batteries
  • RECOND: Recondition of deeply discharged batteries
  • SUPPLY: Use the charger as a power supply

Technical Specification:

  • Model number: 1053
  • Volt: 12V
  • Rated Voltage: AC 220-240VAC, 50-60Hz
  • Charging voltage: NORMAL: 14.4V, COLD/AGM: 14.7V, RECOND: 15.8V, SUPPLY: 13.6V
  • Min battery voltage: 2.0V
  • Charging current: 7A max, current, mains: 1.2A rms (at full charging current)
  • Back current drain: <1Ah/month
  • Ripple: <4%
  • Ambient temperature: -20°C to +50°C, output power is reduced automatically at high temperatures
  • Charger type: 8 step, fully automatic charging cycle
  • Battery types: All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL)
  • Battery capacity: 14-150Ah up to 225Ah for maintenance
  • Dimensions: 191 x 89 x 48mm (L x W x H), weight: 0.8kg
  • Insulation class: IP65
Cigar adapter £6.99 Add to basket
Eyelets £4.99 Add to basket

 

The CTEK XS 800 easily charges all small batteries. It's perfect for your Motorcycle, Lawn Mower or Jet Ski. The CTEK XS 800 is also an ideal maintenance charger for seasonal vehicles with batteries up to 100Ah.
Three step, fully automatic switch mode model.

  • Charges lead-acid batteries (Wet, MF, GEL and AGM) from 1.2Ah to 32Ah, 1.2-100Ah maintenance charging.
  • Maintenance pulse charging increases battery life and gives superb performance.
  • Charges even drained batteries.
  • Pulse recover of slightly sulphated batteries.
  • Low back current drain, low ripple and input voltage independent (170-260V).
  • High efficiency: 85%
  • Delivered with two interchangeable connection leads, one with clamps, and one with eyelet terminals.
  • The charger can be connected for months, ideal for seasonal vehicles.
  • Compact design with mounting holes for permanent assembly.
  • Easy Wall mounting, easily fitted in place using two screws. The diameter of the mounting holes is 4.2mm.
  • 5 year warranty.
  • [BUY NOW]

 

 

CTEK MULTI XT 14000 (24V)

The CTEK MULTI XT 14000 features the same functions as the CTEK MULTI XS 25000 but is intended for 24 Volt batteries.
The ideal charger for buses, trucks, and large boats. The analysis functions help you keep your batteries ready to go at all times.

Lead Lengths
From mains plug to unit = 1.7m
From unit to connectors = 1.5m

  • Eight step, fully automatic switch mode model.
  • Revives, charges, checks and maintains virtually all types of 24V lead-acid batteries (Wet, MF, GEL and AGM) from 28Ah to 300Ah, up to 500Ah maintenance.
  • Desulphation mode with pulses.
  • Soft start for severely discharged batteries.
  • Recondition mode with controlled top charging recovers the capacity of a severely discharged battery.
  • Maintenance pulse charging increases battery life and gives superb performance.
  • Supply mode for use as a power pack, battery backup (UPS) or float maintenance.
  • Charges even drained batteries.
  • Temperature compensated for optimal charging voltage at all times.
  • Low back current drain, low ripple and input voltage independent (170-260V).
  • High efficiency: 85%.
  • The charger can be connected for months, ideal for seasonal vehicles.
  • Compact design with mounting holes for permanent assembly. The charger is easily fitted in place using four screws. The diameter of the mounting holes is 4.5mm
  • 2 year warranty.
  • £199.49
  • [BUY NOW]

 

CTEK MULTI XS 25000

The CTEK MULTI XS 25000 is powerful for batteries that require rapid charging: in your RV, boat, or workshop. The charger automatically adjusts the charge to the battery's temperature.

The CTEK MULTI XS 25000 has the same handy Supply-Mode as the CTEK MULTI XS 7000.

The CTEK MULTI XS 25000 features built-in functions that analyse the status of your battery. Maintenance charging uniquely combines battery requirements of high capacity and long life.

The CTEK MULTI XS 25000 is delivered with a battery lead with clamps, colour coded for easy +/- identification.

The charger also has a sensor cable located together with the battery leads. The unit automatically adjusts the charge voltage if the temperature deviates from +25°C. Higher temperatures lower the voltage and lower temperatures raise the voltage. The sensor cable can be extended or shortened without affecting functionality.

The charger must be fitted with the top or long side facing up to be approved for outdoor use.

Lead Lengths
From mains plug to unit = 1.7m
From unit to connectors = 1.5m

  • Eight step, fully automatic switch mode model.
  • Revives, charges, checks and maintains virtually all types of 12V lead-acid batteries (Wet, MF, GEL and AGM) from 50Ah to 500Ah.
  • Desulphation mode with pulses.
  • Soft start for severely discharged batteries.
  • Recondition mode with controlled top charging recovers the capacity of a severely discharged battery.
  • Maintenance pulse charging increases battery life and gives superb performance.
  • Supply mode for use as a power pack, battery backup (UPS) or float maintenance.
  • Charges even drained batteries.
  • Temperature compensated for optimal charging voltage at all times.
  • Low back current drain, low ripple and input voltage independent (170-260V).
  • High efficiency: 85%
  • The charger can be connected for months, ideal for seasonal vehicles.
  • Compact design with mounting holes for permanent assembly.
  • Easy Wall mounting, easily fitted in place using two screws. The diameter of the mounting holes is 4.5mm.
  • 2 year warranty.
  • £199.49
  • [BUY NOW]

[Back to Top]

 

Accumate

AccuMate is from a range of products with a proven reputation of over 1,000,000 units sold to date. AccuMate is designed to automatically charge and monitor batteries with no danger of over-charging regardless of time. AccuMate is suitable for all 6V and 12V lead acid batteries from 4Ah to 75Ah, making it perfect for owners of vehicles which are not used on a daily basis like classic and sports cars.

Operation of AccuMate is completely automatic. It uses a 1.2A constant current charge as the main stage, while monitoring the battery voltage. When this reaches a pre-set cut off point, it then switches to an intermediate constant voltage 'float charge'. Only when AccuMate has detected that the battery is properly charged will it switch to the final stage for correct long-term battery maintenance and indicate a green LED. If at any time AccuMate detects that the battery has discharged, it will automatically revert to the constant current stage.

Do not be fooled by other similar compact chargers of the same price range, which do not have the complex circuitry to safely charge batteries over long term periods. Accumate is a very sophisticated product despite perhaps dated appearances !

AccuMate 6-12V - 4 step charger & maintainer for 6V and 12V batteries.

Features:

  • Versatile, 4-step, automatic charger and maintainer for all modern and classic 6 & 12V lead-acid batteries up to 75Ah.
  • Perfect for all types of rechargeable lead-acid batteries: filler cap types; absorbed acid "MF" for motorcycles; valve regulated (VRLA); & GEL-electrolyte types.
  • Very easy to use - Select 6V or 12V charging output according to battery type and then connect to battery and mains power. The rest is fully automatic.
  • Comprehensive & intelligent LED indications - AC power on; battery voltage selection; wrong polarity connection; charging; and maintain (charge completed).
  • The green maintain (charge completed) LED means exactly that, charging has been completed.
  • No risk of overcharging – designed for long-term connection. AccuMate`s special monitoring circuits vary & regulate the current & voltage exactly according to the battery manufacturer’s specifications.
  • SAFE & foolproof - No worries about wrong connections, accidentally shorting the battery clamps or blowing fuses. Automatic protection even suppresses sparks.
  • Compact, yet powerful - Will safely charge 12V batteries discharged to as low as 3V (1.5V for 6V batteries) when other chargers are unable to. Charging time equal to a 3 Amp conventional charger despite the compact size.
  • No risk of overheating - Automatic temperature control regulates charge current to a safe level in hot or enclosed conditions.

Delivered with two interchangeable connection sets, one with clamps for bench charging, the other with in-line protection fuse and eyelet terminals for permanent connection to the vehicle’s battery to allow easy reconnection of charger when necessary.

Optional accessories include a wall bracket, additional fused permanent connection leads, cigarette lighter plug lead (also fits DIN 12V socket as found on some BMW, Honda & Triumph touring motorcycles) and a 2.5m output extension lead. CE Certification; 5-year warranty.

Accumate

6V & 12V battery optimiser - ideal for classic cars, motorcycles and many other uses £39.95 Add to basket
Cigar Lighter Socket Adaptor TM72 £12.99 Add to basket

 

Accessories - contact us for prices and information

  • Wall Mounting Bracket
  • Accessory Socket Lead
  • Accessory Plug Lead
  • 2.5m Extension Cable
  • Fused Eyelet Lead
  • Weatherproof Eyelet Lead
  • Cigar Socket Lead
  • TestMate mini
  • Bullet Connector Lead

AccuMate – additional information.

AccuMate charges batteries much quicker than conventional Constant Voltage battery chargers due to its Constant Current mode. AccuMate is also much safer as both Voltage & Current are monitored and regulated.

AccuMate’s advanced 4-step charging program:

(6V values in brackets)

STEP1: Boost – Constant current charging of 1.2A up to 14.3V (7.15V) - Yellow CHARGE LED on

STEP2: Absorption - Voltage held at 14.3V (7.1V) until current drops below 200mA - Yellow CHARGE LED on

STEP3: Maintenance - Float voltage held at 13.5V (6.7V) for ideal long-term battery care - Green MAINTAIN LED on

STEP4: Interactive standby - Active only once a battery has reached step 3:

Monitors if current exceeds 200mA or voltage drops below 13.2V and cycles between step 2 and 3 to prevent the battery from losing any charge due to permanently connected devices such as an alarm or parasitic drain caused by aged or faulty vehicle wiring. With interactive standby your battery will always be ready to start your vehicle.

[Back to Top]

Custom Covers
 
Porsche
 
Ferrari
 
Mercedes Benz
 
BMW
 
British Classics
 
Rolls-Royce & Bentley
 
Maserati
 
Jaguar
 
Caravan Covers
 
Motorhome Covers
 
Gap Stop
 
Touchless Car Cover